tri fpga-status · the bench at a glance

One command reads the bench: CP2102N UART direct on USB (no hub in the path), Digilent JTAG present, openocd not running, lock free, and the last board runs: three x7-board runs PASS 51840/51840.

trinity-fpga $ tri fpga-status                                                                          
uart     CP2102N DIRECT ['0x1100000']   jtag Digilent ['0x140000']                                      
openocd  not running                                                                                    
lock     free                                                                                           
board    NOT LOADED (per xcheck_bitexact_20261001.log, end 2026-10-01T14:11:54Z, exit -6; stale after a 
power cycle or a load outside tri)                                                                      
run      x7-board-gif.log                   PASS   51840/51840                                          
run      x7-board-gif2-load.log             exit 0                                                      
run      x7-board-gif2.log                  PASS   51840/51840                                          
run      x7-board-gif3-load.log             exit 0                                                      
run      x7-board-gif3.log                  PASS   51840/51840                                          
git      trinity-fpga: ahead 0, behind 0 (as of last fetch)                                             
git      igla-coder-gpu: ahead 0, behind 0 (as of last fetch)                                           
loop     cycle 1  tasks {'done': 27, 'recurring': 2, 'pending': 1, 'blocked': 2, 'failed': 2}           
trinity-fpga $ tri fpga-usb                                                                             
DIRECT ['0x1100000']                                                                                    
USB ok: AppleT6000USBXHCI -> CP2102N USB to UART Bridge Controller 10c4:ea60 @ 0x01100000; no hub in the
 path                                                                                                   
trinity-fpga $

recorded 2026-10-04 04:52 UTCreal 5.4 sshown 5.4 sexit codes 0 0

$ tri fpga-status $ tri fpga-usb

Staged: the prompt and the typing. Real: every byte the commands printed, at the time they printed it. Any silence longer than 2 s is shown for 2 s, and the title bar says so while it happens. Edited: home directory shown as ~.

GIF Preview card